For those people following my blogs, you would’ve had an all-in-one install all up and running by now; but now we are going to start afresh. We are going to have a fresh system as explained in my first post, with all the relevant RDO packages installed, and we have all the repositories enabled. Now this installation will be for the foreseeable future, so we won’t need to re-install our OpenStack machine.
This post is going to be quite intensive, such that we are going to try and get to the same stage that we finished in the previous post, but with extra compute nodes in mind.
Continue reading “OpenStack Lab2 — Part 1: Packstack”
Welcome to the third part of the series of the blog, today we are going to look at installing and configuring OpenStack networking which will allow us to assign a floating IP to the VM created a in the previous post, and then we should be able to ping and SSH to the instance.
You will need to have your system up to the stage where all the RPMs, repositories, and base config of the system is configured, with one instance up, and available. If in doubt, follow Parts 1 and 2 of the series.
Continue reading “OpenStack Lab — Part 3: Networking all-in-one”
Welcome to the second part of the series of the blog, today we are going to look at installing and configuring OpenStack using packstack, which is provided by the RDO openstack-packstack RPM.
You will need to have your system up to the stage where all the RPMs, repositories, and base config of the system is up to follow this blog. See Part 1 of this topic for more information
Continue reading “OpenStack Lab — Part 2: Packstack all-in-one”